| Customization: | Available |
|---|---|
| Type: | Digital Laser Displacement Sensor |
| Output Signal Type: | Analog Type |
|
Still deciding? Get samples of US$ 320/Piece
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Analog & RS485 thickness measurement laser distance sensor with high resolution 50mm
(1)proximity sensor 1000+ models
(2)Fiber amplifier and Optic Sensor 3000+ models
(3)Photoelectric Sensor 500+ models
(4)Magnetic Switch 100+ models
(5)Lable sensors 40+ models
| Detection method | Diffuse reflection | ||||||
| High-functional mode | GWY6-30NP-S | JGWY6-50NP-S | JGWY6-80NP-S | JGWY6-120NP-S | JGWY6-250NP-S | ||
| Measurement center distance | 30mm | 50mm | 85mm | 120mm | 250mm | ||
| Measurement range | 30±4mm | 50±10mm | 85±20mm | 120±60mm | 250±150mm | ||
| Light receiving part | CMOS Image sensor | ||||||
| Resolution | 0.5μm | 1.5μm | 2.5μm | 8μm | 20μm | ||
| Linearity | ±0.1%F.S | ||||||
| Temperature characteristics | ±0.08%F.S./ºC | ||||||
| Beam source | Red semiconductor laser level 2[JIS/IEC/GB/KS/FDA Laser Notice No.50/GB]Maximum output:0.39W,Peak wavelength of floodlight;655nm | ||||||
| Beam diameter(Note 2) | 0.1x1mm | 0.5x1mm | 0.75x1.25mm | 1.0x1.5mm | 1.75x3.5mm | ||
| Supply power&valtage | 24VDC±10%Impulse(P-P)0.5V(P-P) | ||||||
| Current consumption | 100mA Below | ||||||
| Response time | 200μs,500μs,1ms,2ms | ||||||
| Analog Output | Voltage | Output range:0~10.5V(Normal),11V(Alarms)Output impedance:100Ω | |||||
| Current | Output range:3.2~20.8mA(Normal),21.6mA(Alarms)load impedance:Below 300Ω | ||||||
OUT1 Output OUT2 Output OUT3 Output |
When NPN action is set Peak in-flow current:50mA Applied voltage:3V~24V DC(Between Output-0V) ·Residual voltage:Below 2V (Current:50mA) Leakage current:Below 0.1mA |
When PNP action is set Max input current:50mA ·Residual voltage:Below 2.8V (Current:50mA) ·Leakage current:Below 0.1mA |
|||||
| Output operation | Open when the output is ON | ||||||
| Short-circuit protection | Equipped (automatic recovery type | ||||||
| NP switching input | When connected to OV:NPN open collector output operates When the power supply is 24V DC connected:PNP open collector output action |
||||||
| Timing input | When NPN action is set:Action when connected to OV or action during connection (varies depending on the setting) When PNP action is set:Action when external power supply+is connected or action during connection(varies depending on the setting) |
||||||
| Multiple input | Perform zero adjustment,reset,memory switching,teaching,saving,and laser control according to the input time When NPN action is set:according to the time of connecting 0V When setting PNP action:according to the time when external power supply +is connected |
||||||
| Communication interface (high-function type) | RS-422 Or RS-485 Baud rate:9,600/19,200/38,400/115,200bps The data length is 8 bits,the end bit length is 1 bit,no parity check,yes BCC,data differentiation:CR |
||||||
| Indicator | Laser light warning | Green light-emitting diode lights up when the laser is emitting light | |||||
| Alarm indicator | Insufficientlightfromtheorangelight-emittingdiodepreventsmeasurement. | ||||||
| Output indicator | Theyellowlight-emittingdiode(numberofdisplaylights:3)lightsupwhentheoutputisactivated | ||||||
| Digital display part | Red LED symbol and 5-digit display | ||||||
| Pollution degree | Below 2,000m | ||||||
| Environmenta Resistance |
Protective structure | P67 (except connection part) | |||||
| Ambient temperature | -10~+45°C(be careful not to condense or freeze)when storing:-20~+60°ºC | ||||||
| Ambient humidity | 35~85%RH:35~85%RH storage:35~85%RH | ||||||
| Ambient illumination | 3,000Ex or less (light-receiving surface illumination with incandescent lamp) | ||||||
| Insulation resistance | 20MQ or more at DC250V Megger (between all terminals and shell) | ||||||
| Withstand voltage | AC1,000V1 minute(between all terminals and case) | ||||||
| Vibration resistant | Endurance frequency 10~55Hz(cycle 1 minute)Double amplitude 1.5mm in X,Y and Z directions for 2 hours each | ||||||
| Shock proo | 500m/s 3 times in X,Y,Z directions | ||||||
| Tightening torque | Below 0.8N-m | ||||||
| Shell material | Enclosure:PBT,Frontcover:Acrylic Cable:PVC | ||||||
){kind=link}