F&C FF-403 Digital Display fibre optical sensors
Fiber Optic Sensor Features:
- Dual digital display for timely sensing value (Red) and set value (Green)
- 4 response speeds - Ultra-fast mode (100us), fast mode (300us), standard mode (1ms),
long-distance mode (2ms)
- Display range : 0-9999
- Simple sensitivity adjustment settings
- Mutual interference prevention allows adjacent installation- One key smart teach setting.
- Various LED light sources (red, green, blue) available for diverse applications
-All-purpose usage for both diffuse reflection fiber units and Through-Beam type fiber Units
Fiber Optic sensor Datasheets :
| Light source |
Red |
| Diffuse Sensing (φ1.0 fibre core) |
200mm |
| Thru-beam Sensing (φ1.0 fibre core) |
1000mm |
| Voltage |
12-24VDC ±10% |
| Current Consumption |
40mA below |
| Output |
NPN/PNP |
NPN Type |
PNP Type |
| NPN open-collector transistor |
PNP open-collector transistor |
| Max current: 100mA |
Max current: 100mA |
| Residual Voltage: 1.0V below at 50mA; 0.4V below at 16mA |
Residual Voltage: 2.0V below at 100mA; 1.0V below at 16mA |
|
|
| NO/NC set |
freely adjust of normally open and normally close |
| Circuit protect |
short-circuit protection; Reverse polarity protection |
| Digital display |
8 bits LED display, 4 bits Green setting value, 4 bits Red sensing value |
| Sensitivity |
Auto/manual Setting |
| Frequency |
1KHz |
| Response time |
100us; 300us ;2ms(standard); 1ms |
| Time Delay |
5s, 0s(standard), 500ms, 50ms, 5ms. 5 types free setting |
| Transmit Power |
4 types, 100%, 50%, 25% ,12% |
| Initial Recovery setting |
press " +" and " -" for 3s at the same time to recovery initial status |
| Fast setting |
press " teach" for 3s on the basis of fiber sensor install well |
| Ambient temperature |
-10 to +50 degree |
| Ambient humidity |
35 to 85% RH |
| Material |
Housing : PC+ABS |
| Weight |
85g |
| Accessories |
1*Mounting bracket |
Fiber Optic sensor Applications :
Fiber Optic sensor Factory Information
F&C Sensing Technology is a high-tech enterprise, specialized in R&D, manufacturing and marketing industrial automation control sensors which is mainly for limit protection, counting and presence or absence judgement. there are 14 series and around 5000 models available, based on Changsha, Dongguan and Taiwan, F&C sensors and our authorized distributors around the world are dedicated to provide wonderful one-stop-service to all the customers. Our main products include Fiber optic sensor, Fiber Unit, proximity sensor,photoelectric sensor, light curtain, label sensor, pressure switch, magnetic switch, din-rail power supply etc. and producing is strictly correspond with ISO9001, ISO14001 and OHSAS18001.
Fiber Optic sensor factory Office, exhibition, staffs & customers
){kind=link}