| Customization: | Available |
|---|---|
| Type: | Slot Type Photoelectric Sensor |
| Output Signal Type: | Switching Type |
|
Still deciding? Get samples of US$ 5/Piece
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
F&C| F&C groove through beam position sensor photoelectric switch 5-24VDC
(1) Proximity sensor 1000+ models| Item | Specification table |
| Sensing type | (Groove type)Through beam reflection |
| Minimum detection | Opaque object Φ2 .0x0 .8mm |
| Standard target | Opaque object Φ2.0x0 .8mm or more |
| Zero sensitivity adjustment | NO |
| Light source | 940nm infrared modulated light |
| Hysteresis | <2% Scanning distance |
| Operating Voltage | 5~24VDC±10% impulse ( P- P) 10% |
| Current consumption | <20mA |
| Load current | 100mA |
| Leakage current | <0.01mA No Load |
| Residual voltage | < 1.5VDC(Load current 50mA, wire 2M ) |
| Repeatability | <1% Scanning distance |
| Response frequency | 1KHZ |
| Reverse polarity protection | Yes |
| Short circuit protection | Yes |
| Output type | NPN . NO/ NPN .NC PNP. NO/ PNP. NC |
| Response time | 0 .5ms |
| Insulation resistance | >20MΩ( Between the charging part and the outer casing) |
| Dielectric strength | 1000VDC 50~60Hz 1min( Between the charging part and the outer casing) |
| Ambient temperature | -10~50ºC(Without icing or condensation ) |
| Ambient humidity | 35~85% Relative humidity |
| Ambien illumination | Sunlight :3,000LX , Light:2,000LX |
| Storage temperature | -20~60ºC(With ou icing or condensation ) |
| Storage humidity | 35~95% HR Relative humidity |
| Protection degree | IP65 |
| Connection | Φ2 .8x2M/4-wires Φ2 .8 Lead 150mm with M8 connector |
| Material | PBT+PC |
| Weight | Approx:27g/27g/30g/35g/38g/43g |
){kind=link}