| Customization: | Available |
|---|---|
| Type: | Position Sensor |
| Principle: | Inductive Sensor |
|
Still deciding? Get samples of US$ 25/Piece
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
24-240 volt AC inductive proximity switch M30 two wire shielded NO(normally open)10mm
(1) Proximity sensor 1000+ models| Item | Specification |
| Operating voltage | 24~240VAC±10% |
| Current consumption | <1.8mA |
| Current consumption | 300mA |
| Leakage current | <1.8mA No-load |
| Residual voltage | <8VAC(Load current 100mA,wire 2m) |
| Repetition accuracy | <1%sensing distance |
| Response frequency | 25HZ |
| Response time | 2ms |
| Reverse polarity protection | YES |
| Output short-circuit protection | NONE |
| Output type | 2 wire.No;AC 2 wire.NC |
| Ambient temperature | -25ºC~70ºC |
| Temperature drift | <10%sensing distance |
| Protection degree | IP67 |
| Impact withstand voltage | 1000VAC 50~60HZ 1min(Between the charging part and the outer casing) |
| Insulation resistance | >20MQ(Between the charging part and the outer casing) |
| Connection method | φ4x2M/2-wires φ4 Lead wire 150mm with M8 connector |
| Shell material | PBT nickel plated brass+PVC |
| Net weight | About 65g/90g/120g |
){kind=link}