F&C Fhycu18-100 N/P M18 Short Range Ultrasonic Proximity Sensor

• Customization: Available
• Type: Large range Ultrasonic Sensor
• Output Signal Type: Digital Type
• Model NO.: FHYCU18-100 N/P
• Production Process: Integration
• Sensitivity: High
• Probe Type: Straight Probe
• Measuring Medium: Solid
• Detection mode: Direct Reflection Type
• IP Rating: IP67
• Certification: RoHS/CE/ISO
• Customized: Customized
• Detection Range: 60-1000mm
• Repeatability Accuracy: ±0.15% of The Full Capacity Level
• Response Time: 50ms
• Switching Frequency: 20Hz
• Working Voltage: 12-24 VDC with Pulsation P-P Less Than 10%
• Overload Protection: 200mA Both The Red and Green Lights Are Flashing
• No-Load Current: <30mA
• Voltage Drop: <2V
• Load Impedance: I/0~300 Ohm,V/>1K Ohm
• Transport Package: White Box
• Specification: 15.00cm * 15.00cm * 12.00cm
• Trademark: F&C
• Origin: Hunan, China
• Production Capacity: 100000 Piece/Pieces Per Month

Product Description

Product Description

Product introduction:

Standard M18 threaded housing,measuring range 10~100mm,single switching output with optional NPN/PNP.It avoids interference from object color,transparent material,dust and ambient light,compact size for narrow-space automated equipment installation.

The main application scenarios of the product:

1.3C Precision Production Line:Detect placement of PCB and micro components,automatically stop equipment for missing part prevention. 
2. Daily Chemical Filling Line:Check vial and pouch in-place status to control start and stop of filling & sealing machine. 
3. Mini Material Conveyor:Limit small plastic box position to prevent blockage caused by accumulated parts.

Specification

Learning function

When the sensor is powered on, the red light is not targeted.The learning function works within five minutes of electrification.A1A2 can be set in five minutes; A1A2 can be set twice.
When points A1 and A2 are set within the effective monitoring range ofthe sensor, place the target object at the monitoring distance of point A1or A2.When the sensor detects the target object, the LED will turn green.Conn-ect the learning line to V+, the green light will flash, and disconnect after3 seconds. The A2 point has been successfully set Connect the learningline to V -, the green light will flash, disconnect after 3 seconds, and setpoint A1 successfully.
When points A1 and A2 are set to infinity, if the sensor is facing each ot-her and there is no target, the sensor will not detect the target object and the LED will turn red.Connect the learning line to V+, the red light willflash, and the connection will be disconnected after 3 seconds. The A2point has been successfully set Connect the leaming line to V -, the redlight will flash, disconnect after 3 seconds, and set point A1 successfully.After setting points A1 and A2, the sensor has a memory function, and t-he most recent settings will be saved when power is turned off or restarted in the future.

Synchronization function

Up to 5 sensors with different detection distances can be mixed, and thesynchronization function can be activated by directly connecting them t-ogether. More than 5 sensors or asynchronous functions of different models need to be implemented using a synchronous box.

Single and double sheet learning methods for different materials

Learning mode: pink line is the learning line, the pink line is suspended in the learning mode
1.After power on, the yellow and green lights flash. Place a plece of material between the two sensors, and the green light flashes.Short-circut the pink Ine and the bue line (GND), and then release the green line to tum on. At this tme, the single-sheet learningis completed.
2.Then place two pieces of material in the middle of the sensor, and then use the pink line to short-circuit the brown line (+) to switch todouble -sheet leaming mode. At this time, the indicator light turns red and flashes. Then short-circut the pink line with the blue ine (GND).and then release it. The test red light becomes solid, and the double-sheet learning is completed.
3.After learning is completed, tum off the power Connect the pink wire and the blue wire (GND) together, and tur on the power again.and you can use it normally.
4.In the learning mode, enter the single sheet leaming step. If the thickness of the placed material is too thick and exceeds the detect-on range of the sensor. Before shoring the blue line (GND), after placing a single sheet of material, the indicator light will tumn red and flash.
5.in the leaming mode, enter the single sheet learning step. If the thickness of the material placed 1s too thin, the sensor canno detectt-he material. Before shorting the blue line (GND), after placing a single sheet of material, the indicator ight wll turn yellow and flash.