| Customization: | Available |
|---|---|
| Type: | Inductive Sensor |
| Principle: | Inductive |
|
Still deciding? Get samples of $ !
Order Sample
|
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Customize M18 high speed inductive proximity sensor 10Khz
(1) Proximity sensor 1000+ models| ltem | Specification |
| Operating voltage | Within 12~24VDC±10%impulse (P-P)10% |
| Current consumption | <10mA |
| Current consumption | 100mA |
| Leakage current | <0.01mA No-load |
| Residual voltage | <1.0VDC(Load current 100mA,wire 2m) |
| Repetition accuracy | <1%sensing distance |
| Response frequency | 5K/10KHZ |
| Response time | 0.1ms |
| Reverse polarity protection | YES |
| Output short-circuit protection | YES |
| Output type | NPN.NO/NPN.NC PNP.NO/PNP.NC |
| Ambient temperature | -25ºC~70ºC |
| Temperature drift | <10%sensing distance |
| Protection degree | IP67 |
| Impact withstand voltage | 1000VAC 50~60HZ 1min(Between the charging part and the outer casing) |
| Insulation resistance | >20MΩ(Between the charging part and the outer casing) |
| Connection method | φ4x2M/3-wires φ4 Lead wire 150mm with M8 connector with M12 connector |
| Shell material | PBT nickel plated brass+PVC |
| Net weight | About 68g/73g |
1.Flexible cable
2.360 degree view LED indicator
3.Red protective sleeve
4.Imported electronic components
5.Durable Stainless Shell, Strong anti-interference ability
6.Can customize 5V operating Voltage,different frequency, two wires products.
){kind=link}