|
Still deciding? Get samples of $ !
Order Sample
|
| Customization: | Available |
|---|---|
| Type: | Digital Laser Displacement Sensor |
| Output Signal Type: | Analog Type |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
F&C high precision analog output laser measuring sensor distance measuring sensor
(1)proximity sensor 1000+ models
(2)Fiber amplifier and Optic Sensor 3000+ models
(3)Photoelectric Sensor 500+ models
(4)Magnetic Switch 100+ models
(5)Lable sensors 40+ models
| Detection method | Diffuse reflection | ||||||
| High-functional model | JGWY3-30NV | JGWY3-50NV | JGWY3-100NV | JGWY3-200NV | JGWY3-400NV | ||
| Measurement center distance | 30mm | 50mm | 100mm | 200mm | 400mm | ||
| Measurement range | 30±5mm | 50±15mm | 100±35mm | 200±80mm | 400±200mm | ||
| Light receiving part | CMOS Image senso | ||||||
| Resolution | 10μm | 30μm | 70μm | 200μm | 300μm ( Measuring range 200mm-400mm) 800μm ( Measuring range 400mm-600mm) |
||
| Linearity | ±0.1%F.S | +0.2%F.S | ± 0.2%FS ( Measuring range200mm-400mm) | ||||
| ± 0 3 % F.S ( Measuring range200mm-400mm) | |||||||
| Temperature characteristics | ±0.03%F.S./ºC | ||||||
| Beam source | Red semiconductor laser level 2[JIS/IEC/GB/KS/FDA Laser Notice No.50/GB]Maximum output:0.39W.Peak wavelength of floodlight:655nm | ||||||
| 3eam diameter(Note 2) | About φ50μm | About φ70μm | About φ120μm | About φ300μm | About φ500μm | ||
| Supply power&voltage | 12VDC~24DC±10%Impulse(P-P)0.5V(P-P) | ||||||
| Current consumption | 40mA Below | ||||||
| Response time | 200μs,500μs,1ms,2ms | ||||||
| Analog Output | Voltage | Output range:0~10.5V(Normal),11V(Alarms)Output impedance:100Ω | |||||
| Current | Dutput range:3.2~20.8mA(Normal),21.6mA(Alarms) load impedance:Below 300Ω | ||||||
OUT1 Outpu OUT2 Output OUT3 Output |
When NPN action is se Peak in-flow current:50mA Applied voltage:3V~24V DC(Between Output-0V) Residual voltage:Below 2V(Current:50mA) Leakage current:Below 0.1mA |
When PNP action is set ·Max input current:50mA ·Residual voltage:Below 2.8V(Current:50mA) ·Leakage current:Below 0.1mA |
|||||
| Output operation | Open when the output is ON | ||||||
| Short-circuit protection | Equipped (automatic recovery type) | ||||||
| NP switching input | When connected to OV:NPN open collector output operates When the power supply is 24V DC connected:PNP open collector output action |
||||||
| Timing input | When NPN action is set:Action when connected to OV or action during connection (varies depending on the setting) When PNP action is set:Action when external power supply+is connected or action during connection (varies depending on the setting) |
||||||
| Multiple input | Perform zero adjustment,reset,memory switching,teaching,saving,and laser control according to the input time When NPN action is set:according to the time of connecting OV When setting PNP action:according to the time when external power supply +is connected |
||||||
| Communication interface (high-function type) | RS-422 Or RS-485 Baud rate:9,600/19,200/38,400/115,200bps The data length is 8 bits,the end bit length is 1 bit,no parity check,yes BCC,data differentiation:CR |
||||||
| Indicato | Laser light warning | Green light-emitting diode lights up when the laser is emitting light | |||||
| Alarm indicator | Insufficientlightfromtheorangelight-emittingdiodepreventsmeasurement. | ||||||
| Output indicator | Theyellowlight-emittingdiode(numberofdisplaylights:3)lightsupwhentheoutputisactivated | ||||||
| Digital display part | Red LED symbol and 5-digit display | ||||||
| Pollution degree | Below 2,000m | ||||||
| Environmental | Protective structure | IP67 (except connection part | |||||
| Ambient temperature | -10~+45°ºC(be careful not to condense or freeze)when storing:-20~+60ºC | ||||||
| Ambient humidity | 35~85%RH:35~85%RH storage:35~85%RH | ||||||
| Ambient illumination | 3,000Ex or less (light-receiving surface illumination with incandescent lamp) | ||||||
| Insulation resistance | 20MQ or more at DC250V Megger (between all terminals and shell) | ||||||
| Withstand voltage | AC1,000V1 minute (between all terminals and case | ||||||
| Vibration resistant | Endurance frequency 10~55Hz (cycle 1 minute)Double amplitude 1.5mm in X,Y and Z directions for 2 hours each | ||||||
| Shock proof | Extension up to total 10 m with 0.3 mm2 or more cable. | ||||||
| Tightening torque | Enclosure:Aluminum die-cast,Front cover:Acrylic | ||||||
| Shel material | Netweight:35gapprox.(withoutcable),85gapprox.(includingcable) | ||||||









